1. Abdollahi A., Peco C., Millan D., Arroyo M. and Arias I. Computational evaluation of the flexoelectric effect in dielectric solids, Journal of Applied Physics, Vol. 116, 093502, 2014, 10.1063/1.4893974

  2. Agelet S., Chiumenti M., Cervera M., Dialami N. and Seret. A. Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes, Archives of Computational Methods in Engineering, Vol. 21, pp 3-37, 2014, 10.1007/s11831-014-9094-z

  3. Alonso E.E. and Pinyol N.M. Slope stability in slightly fissured claystones and marls, Landslides, 2014, 10.1007/s10346-014-0526-5

  4. Alonso, E. E., Pinyol, N. M. and Yerro. Mathematical modelling of slopes, Procedia Earth and Planetary Science, Vol. 9, pp. 64-73, 2014, 10.1016/j.proeps.2014.06.002

  5. Amiri F., Anitescu C., Arroyo M., Bordas S.P.A. and Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods, Computational Mechanics, Vol. 53, pp. 45-57, 2014, 10.1007/s00466-013-0891-2

  6. Amiri F., Millan D., Shen Y., Rabczuk T. and Arroyo M. Phase-field modeling of fracture in linear thin shells, Theoretical and Applied Fracture Mechanics, Vol. 69 pp.102-109, 2014, 10.1016/j.tafmec.2013.12.002

  7. Ammar A., Huerta A., Chinesta F., Cueto E. and Leygue A. Parametric solutions involving geometry: a step towards efficient shape optimization, Theoretical and Applied Fracture Mechanics, Vol. 268, pp. 178-193, 2014, 10.1016/j.cma.2013.09.003

  8. Arroyo M. and Simone A. Shape control of active surfaces inspired by the movement of euglenids, Journal of the Mechanics and Physics of Solids, Vol. 62, pp. 99-112, 2014, 10.1016/j.jmps.2013.09.017

  9. Ávila M., Codina R. and Principe. J. Large eddy simulation of low Mach number flows using a dynamical and orthogonal subgrid scales, Computers & Fluids, Vol. 99, pp. 44-66, 2014, 10.1016/j.compfluid.2014.04.003

  10. Badia S., Codina R., Gudi T. and Guzmán J. Error analysis of discontinuous Galerkin methods for the Stokes problem under minimum regularity, IMA Journal of Numerical Analysis, Vol. 34, pp. 800-819, 2014, 10.1093/imanum/drt022

  11. Badia S, Codina R. and Espinoza H. Stability, convergence and accuracy of stabilized finite element methods for the wave equation in mixed form, SIAM Journal on Numerical Analysis, Vol. 52, pp. 1729-1752, 2014, 10.1137/130918708

  12. Badia S. and Hierro A. On monotonicity-preserving stabilized finite element approximations of transport problems, SIAM J. Sci. Comput, Vol. 36(6), pp. 2673-2697, 2014, 10.1137/130927206

  13. Badia S. and Gutiérrez-Santacreu J.V. Convergence towards weak solutions of the Navier-Stokes equations for a finite element approximation with numerical subgrid scale modeling, IMA Journal of Numerical Analysis, Vol. 34(3), pp. 1193-1221, 2014, 10.1093/imanum/drt023

  14. Badia S., Martín A. and Planas R. Block recursive LU preconditioners for the thermally coupled incompressible inductionless MHD problem, Journal of Computational Physics, Vol. 274, pp. 562-591, 2014, 10.1016/j.jcp.2014.06.028

  15. Badia S., Martín A. and Principe J. A highly scalable parallel implementation of balancing domain decomposition by constraints, SIAM Journal on Scientific Computing, Vol. 36(2), pp. 190-218, 2014, 10.1137/130931989

  16. Baiges J. and Codina R. Weak imposition of essential boundary conditions in the finite element approx. of elliptic problems with non-matching meshes, International Journal for Numerical Methods in Engineering, 2014, 10.1002/nme.4815

  17. Barros J., Flores R., López J. and Martínez-Val. R. Frequency and damping identification in flutter flight testing, Journal of Aerospace Engineering, 2014, 10.1177/0954410014533100

  18. Buachart C., Kanok-Nukulchai W., Ortega E. and Oñate E. A shallow water model by finite point method, International Journal of Computational Methods, Vol. 11(01), 1350047, 2014, 10.1142/S0219876213500473

  19. Buddhima I., Premadasa W., Brown E.T., Gens A. and Heitor, A. Shear strength of rock joints influenced by compacted infill, Int. J. Rock Mechanics & Mining Science, Vol. 70, pp. 296-307, 2014, 10.1016/j.ijrmms.2014.04.019

  20. Bussetta P., Arroyo M., Gens A. and O’Sullivan C. Multi-scale analysis of cone penetration test (CPT) in a virtual calibration chamber, Canadian Geotechnical Journal, Vol. 51 (1), pp. 51-66, 2014, 10.1139/cgj-2012-0476

  21. Bussetta P., Dialami N., Boman R., Chiumenti M., Agelet C., Cervera M. and Ponthot. J-P. Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin, Steel Research International, Vol. 85, pp. 968–979, 2014, 10.1002/srin.201300182

  22. Cai Q., Kollmannsberger S., Sala-Lardies E., Huerta A. and Rank E. On the natural stabilization of convection dominated problems using high order Bubnov–Galerkin finite elements, Computers and Mathematics with Applications, Vol. 66, pp. 2545-2558, 2014, 10.1016/j.camwa.2013.09.009

  23. Cante J., Dávalos C., Hernández J.A., Oliver J., Jonsén P., Gustafsson G., and Häggblad H.-A. PFEM-based modeling of industrial granular flows, Comp. Part. Mech, Vol. 1, pp. 47-70, 2014, 10.1007/s40571-014-0004-9

  24. Carreño M.L., Barbat H. and Cardona O.D. Método numérico para la evaluación holística del riesgo sísmico utilizando la teoría de conjuntos difusos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 30-1, pp. 25-34, 2014, 10.1016/j.rimni.2012.10.002

  25. Castillo E. and Codina. R. Stabilized stress-velocity-pressure finite element formulations of the Navier-Stokes problem for fluids with nonlinear viscosity, Computer Methods in Applied Mechanics and Engineering, Vol. 279, pp. 554-578, 2014, 10.1016/j.cma.2014.07.003

  26. Castillo E. and Codina. R. Variational multi-scale stabilized formulations for the stationary three-field incompressible viscoelastic flow problem, Computer Methods in Applied Mechanics and Engineering, Vol. 279, pp. 579-605, 2014, 10.1016/j.cma.2014.07.006

  27. Castro Medina J.C., López Almansa F., and Oller S. Modelización numérica del comportamiento estructural cíclico de barras esbeltas de acero con pandeo restringido, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (4), pp. 229-237, 2014, 10.1016/j.rimni.2013.07.008

  28. Cerrolaza M., Carrero W, Cedeño J. and Valencia L. Finite element analysis of a device for alveolar osteogenic distraction in human mandible, J. Biomed Eng. App. Bas. & Comm., 2014, 10.4015/S1016237215500349

  29. Cerrolaza M., Gavidia G., Soudah E. and Martín M. Modeling human tissues: an integrated methodology, J. Biomed Eng. App. Bas. & Comm., Vol. 26(1), 1450012, 2014, 10.4015/S1016237214500124

  30. Climent N., Arroyo M., O’Sullivan C. and Gens A. Sand production simulation coupling DEM with CFD, European Journal of Environmental and Civil Engineering, Vol. 18 (9), pp. 983-1008, 2014, 10.1080/19648189.2014.920280

  31. Cosimo A, Cardona A. and Idelsohn S.R. Improving the k-compressibility of hyper reduced order models with moving sources: Applications to welding and phase change problems, Computer Methods in Applied Mechanics and Engineering, Vol 274, pp. 237–263, 2014, doi:10.1016/j.cma.2014.02.011

  32. Costarelli S., Arroyo M., Paz R.R., Dalcin L.D. and Idelsohn S.R. GPGPU implementation of the BFECC algorithm for pure advection equations, Cluster Computing, Vol 17, 243-254, 2014, 10.1007/s10586-013-0329-9

  33. Del Río J., Romero E. and Cerrolaza M. Analysis of blood flow passing through heart valves using a computational model of concentrated parameters, Biom. Eng. App. Bas. & Comm, Vol. 26(6), 8pp, 2014, 10.4015/S1016237214500689

  34. Dialami N., Chiumenti M., Cervera M., Agelet de Saracibar C. and Ponthot J.P. Material flow visualization in friction stir welding via particle tracing, International Journal of Material Forming, Vol. 8 (2), pp. 167-181, 2014, 10.1007/s12289-013-1157-4

  35. Espinoza H., Codina R. and Badia S. A Sommerfeld non-reflecting boundary condition for the wave equation in mixed form, Computer Methods in Applied Mechanics and Engineering, Vol. 276, pp. 122-148, 2014, doi:10.1016/j.cma.2014.03.015

  36. Flores R., Ortega E. and Oñate, E. Simple and efficient numerical tools for the analysis of parachutes, Engineering Computations, Vol. 31 (5), pp. 957-985, 2014, 10.1108/EC-10-2012-0247

  37. Garitte B., Gens A., Vaunat J. and Armand G. Thermal conductivity of argillaceous rocks: Determination methodology using in situ heating tests, Rock Mechanics and Rock Engineering, Vol. 47 (1), pp. 111-129, 2014, 10.1007/s00603-012-0335-x

  38. Gimenez J., Nigro N.M. and Idelsohn S.R. Evaluating the performance of the Particle Finite Element Method in parallel architcetures, Computational Particles Mechanics, Vol. 1(1), pp 103-116, 2014, 10.1007/s40571-014-0009-4

  39. Giorgiani G., Fernández-Méndez S. and Huerta A. Hybridizable Discontinuos Galerkin with degree adaptivity for the incompressible Navier-Stokes equations, Computers & Fluids, Vol. 98, pp. 196-208, 2014, 10.1016/j.compfluid.2014.01.011

  40. Gonzalez-Drigo R., Ávila-Haro J. A., Barbat A.H., Pujades L. G., Vargas Y. F., Lagomarsino S. and Cattari S. Modernist URM buildings of Barcelona: Seismic vulnerability and risk assessment, International Journal for Architectural Heritage, 2014, 10.1080/15583058.2013.766779

  41. Heltai L., Arroyo M. and DeSimone A. Nonsingular isogeometric boundary element method for Stokes flows in 3D, Computer Methods in Applied Mechanics and Engineering, Vol. 268, pp. 514-539, 2014, 10.1016/j.cma.2013.09.017

  42. Hernandez J.A., Oliver J., Huespe A.E., Caicedo M.A. and Cante J.C. High-performance model reduction techniques in computational multiscale homogenization, Computer Methods in Applied Mechanics and Engineering, Vol. 276 149-189, 2014, 10.1016/j.cma.2014.03.011

  43. Hoffmann C., Meler N., Pinyol N.M. and Alonso E. E. Small scale slope failure benchmark test. Modelling and prediction, Procedia Earth and Planetary Science, Vol. 9, pp. 201-205, 2014, 10.1016/j.proeps.2014.06.021

  44. Idelsohn S.R., Marti J., Becker P. and Oñate E. Analysis of multifluid flows with large time steps using the Particle Finite Element Method, Int. Journal for Num. Methods in Fluids, Vol. 75 (9), pp. 621-644, 2014, 10.1002/fld.3908

  45. Kempel F., Schartel B., Marti J. M., Butler K. M., Rossi R., Idelsohn S.R., Oñate E. and Hofman A. Modelling the vertical UL 94 test: competition and collaboration between melt dripping, gasification and combustion, Fire and Materials, 2014, 10.1002/fam.2257 | Scipedia

  46. Khalifat, N., Rahimi M., Bitbol A.F., Seigneuret M., Fournier J.B., Puff N., Arroyo M. and Angelova M.I. Interplay of packing and flip-flop in local bilayer deformation. How phosphatidylglycerol could rescue mitochondrial function in a cardiolipin-deficient yeast mutant, Biophysical Journal, Vol. 107 (4), pp. 879-890, 2014, 10.1016/j.bpj.2014.07.015

  47. Kollmannsberger S., Özcan A., Baiges J., Ruess M., Rank E. and Reali A. Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches, International Journal for Numerical Methods in Engineering, 2014, 10.1002/nme.4817

  48. Larese A., Rossi R. and Oñate. Finite element modeling of free surface flow in variable porosity media, Archives for Numerical Methods in Engineering, 2014, 10.1007/s11831-014-9140-x

  49. Li B., Peco C., Millan D., Arias I. and Arroyo M. Phase-field modeling and simulation of fracture in brittle materials with strongly anisotropic surface energy, International Journal for Numerical Methods in Engineering, 2014, 0.1002/nme.4726

  50. Lloret-Cabot M., Wheeler S.J., Pineda J.A., Sheng D. and Gens A. Relative performance of two unsaturated soil models using different constitutive variables, Canadian Geotechnical Journal, Vol. 51(12), pp. 1423-1437, 2014, 10.1139/cgj-2013-0462

  51. López-Almansa F. and Oller S. Resolución numérica de las ecuaciones del movimiento de edificios de varias plantas con no linealidades severas, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (3), pp. 194-202, 2014, 10.1016/j.rimni.2013.06.007

  52. Marti-Herrero J., Alvarez R., Rojas M.R., Aliaga L., Céspedes R. and Carbonell J. Improvement through low cost biofilm carrier in anaerobic tubular digestion in cold climate regions, Bioresource Technology, Vol. 167, pp. 87-93, 2014, 10.1016/j.biortech.2014.05.115

  53. Marti-Herrero J., Chipana M., Cuevas C., Paco G., Serrano V., Zymla B., Heising K., Sologuren J. and Gamarra A. Low cost tubular digesters as appropriate technology for widespread application: Results and lessons learned from Bolivia, Renewable Energy, Vol. 71, pp. 156-165, 2014, 10.1016/j.renene.2014.05.036

  54. Marulanda M.C., Cardona O.D., Mora M.G. and Barbat A.H. Design and implementation of a voluntary collective earthquake insurance policy to cover low-income homeowners in a developing country, Natural Hazards, Vol. 74, pp. 2071-2088, 2014, 10.1007/s11069-0114-1291-4

  55. Oñate E, Celigueta M.A., Latorre S., Casas G., Rossi R. and Rojek J. Lagrangian analysis of multiscale particulate flows with the particle finite element method, Computational Particle Mechanics, Vol. 1 (1), pp. 85-102, 2014, 10.1007/s40571-014-0012-9

  56. Oñate E., Nadukandi P. and Idelsohn S.R. P1/P0+ elements for incompressible flows with discontinuos material properties, Comput. Methods Appl. Mech. Engrg, Vol. 271, 185-209, 2014, 10.1016/j.cma.2013.12.009

  57. Ortega E., Oñate E., Idelsohn S.R. and Flores R. Application of the finite point method to high-Reynolds number compressible flow problems, International Journal for Numerical Methods in Fluids, Vol. 74(10), pp. 732-748, 2014, 10.1002/fld.3871

  58. Ortega E., Oñate E., Idelsohn S.R. and Flores R. Comparative accuracy and performance assessment of the finite point method in compressible flow problems, Computers & Fluids, Vol. 89, pp. 53-65, 2014, 10.1016/j.compfluid.2013.10.024

  59. Otero F., Oller S., Martinez X. and Salomón O. Numerical homogenization for composite materials analysis. Comparison with other micro mechanical formulations, Composite Structures, Vol. 122, pp. 405-416, 2014, 10.1016/j.compstruct.2014.11.041

  60. Pelà L., Cervera M., Oller S. and Chiumenti M. A localized damage model for orthotropic materials, Engineering Fracture Mechanics, Vol. 124-125, pp. 196-216, 2014, 10.1016/j.engfracmech.2014.04.027

  61. Pérez M. A., Gil L., Sánchez M. and Oller S. Comparative experimental analysis of the effect caused by artificial and real induced damage in composite laminates, Composite Structures, Vol. 112, pp. 169-178, 2014, 10.1016/j.compstruct.2014.02.017

  62. Pérez-Pozo L., Campos A., Lascano S., Oller S. and Rodríguez-Ferran A. A Finite points method approach for strain localization using the gradient plasticity formulation, Mathematical Problems in Engineering, Vol. 2014, pp.12, 2014, 10.1155/2014/782079

  63. Ryzhakov P., Cotela P. J., Rossi R. and Oñate E. A two-step monolithic method for efficient simulation of incompressible flows, Int. Journal for Num. Methods in Fluids, Vol. 74(12), pp. 919-934, 2014, 10.1002/fld.3881

  64. Soudah E., Rossi R, Idelsohn S.R. and Oñate. E. A reduced-order model based on the coupled 1D-3D finite element simulations for an efficient analysis of hemodynamics problems, Computational Mechanics, Vol. 54 (4), pp. 1013-1022, 2014, 10.1007/s00466-014-1040-2

  65. Terradas G., Pham C.H., Triolo M.J., Martí-Herrero J. and Sommer S.G. Thermic model to predict biogas production in unheated fixed-dome digesters buried in the ground, Environmental Science Technology, Vol. 48(6), pp. 3253-3262, 2014, 10.1021/es403215w

  66. Vanegas J.M. and Arroyo M. Force transduction and lipid binding in MscL: A continuum-molecular approach, PloS One, Vol. 9, pp. e113947, 2014, 10.1371/journal.pone.0113947

  67. Vanegas J.M., Torres-Sánchez A. and Arroyo M. Importance of force decomposition for local stress calculations in biomembrane molecular simulations, Journal of Chemical Theory and Computation, Vol. 10(2), pp. 691-702, 2014, 10.1021/ct4008926

  68. Vargas P.E., Oñate E. and Oller S. Formulación de elementos finitos para vigas de sección abierta formadas por laminados compuestos incluyendo las deformaciones tangenciales por cortante y torsión, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (4), pp. 238-246, 2014, 10.1016/j.rimni.2013.07.007

  69. Velásquez C.A., Cardona O.D., Carreño M.L. and Barbat A.H. Retrospective assessment of risk to natural hazards, International Journal for Disaster Risk Reduction, Vol. 10(2), Part B, pp. 477-489, 2014, 10.1016/j.ijdrr.2014.05.005

  70. Velásquez C.A., Cardona O.D., Mora M.G., Yamín L.E., Carreño M.L. and Barbat H. Hybrid loss exceedance curve (HLEC) for disaster risk assessment, Natural Hazards, Vol. 72 (2), pp. 455-479, 2014, 10.1007/s11069-013-1017-z

  71. Yamin L.E., Hurtado A.I., Barbat A.H. and Cardona O.D. Seismic and wind vulnerability assessment for the GAR-13 global risk model, International Journal for Disaster Risk Reduction, Vol. 10, Part B, pp. 452-460, 2014, 10.1016/j.ijdrr.2014.05.007

  72. Zhang K. and Arroyo M. Understanding and strain-engineering wrinkle networks in supported graphene through simulations, Journal of the Mechanics and Physics of Solids, Vol. 72, pp. 61-74, 2014, 10.1016/j.jmps.2014.07.012

  73. Alberto F. Martín, Ruymán Reyes, Rosa M. Badia, Enrique S. Quintana-Ortí Leveraging Task-Parallelism in Message-Passing Dense Matrix Factorizations using SMPSs, Parallel Computing, Vol. 5-6 , pp 113-128, 2014.

  74. José I. Aliaga, María Barreda, Manuel F. Dolz, Alberto F. Martín, Rafael Mayo, Enrique S. Quintana-Ortí, Assessing the impact of the CPU power-saving modes on the task-parallel solution of sparse linear systems, Cluster Computing, Vol. 17(4), pp 1335-1348, 2014.

Source: www.scopus.com