1. Ali S., Ahmad F., Yusoff P.S.M.M., Muhamad N., Oñate E., Raza M.R., Malik K., A review of graphene reinforced Cu matrix composites for thermal management of smart electronics, Composites Part A: Applied Science and Manufacturing, 144, 106357 - 106357, 2021.
  2. Andrade C., Martínez-serrano A., Sanjuán M.Á., Tenorio Ríos J.A., Reduced carbonation, sulfate and chloride ingress due to the substitution of cement by 10% non-precalcined bentonite, Materials, 14, 5, 1 - 1, 2021.
  3. Andrade D.G., Leitão C., Dialami N., Chiumenti M., Rodrigues D.M., Analysis of contact conditions and its influence on strain rate and temperature in friction stir welding, International Journal of Mechanical Sciences, 191, 106095 - 106095, 2021.
  4. Bachmann J., Yi X., Tserpes K., Sguazzo C., Barbu L.G., Tse B., Soutis C., Ramón E., Linuesa H., Bechtel S., Towards a circular economy in the aviation sector using eco-composites for interior and secondary structures. Results and recommendations from the eu/china project eco-compass, Aerospace, 8, 5, 131 - 131, 2021.
  5. Badia S., Caicedo M.A., Martín A.F., Principe J., A robust and scalable unfitted adaptive finite element framework for nonlinear solid mechanics, Computer Methods in Applied Mechanics and Engineering, 386, 114093 - 114093, 2021.
  6. Badia S., Martín A.F., Neiva E., Verdugo F., The aggregated unfitted finite element method on parallel tree-based adaptive meshes, SIAM Journal on Scientific Computing, 43, 3, C203 - C203, 2021.
  7. Behrens J., Løvholt F., Jalayer F., Lorito S., Salgado-Gálvez M.A., Sørensen M., Abadie S., Aguirre-Ayerbe I., Aniel-Quiroga I., Babeyko A., Baiguera M., Basili R., Belliazzi S., Grezio A., Johnson K., Murphy S., Paris R., Rafliana I., De Risi R., Rossetto T., Selva J., Taroni M., Del Zoppo M., Armigliato A., Bureš V., Cech P., Cecioni C., Christodoulides P., Davies G., Dias F., Bayraktar H.B., González M., Gritsevich M., Guillas S., Harbitz C.B., Kânoǧlu U., Macías J., Papadopoulos G.A., Polet J., Romano F., Salamon A., Scala A., Stepinac M., Tappin D.R., Thio H.K., Tonini R., Triantafyllou I., Ulrich T., Varini E., Volpe M., Vyhmeister E., Probabilistic Tsunami Hazard and Risk Analysis: A Review of Research Gaps, Frontiers in Earth Science, 9, 628772 - 628772, 2021.
  8. Bragard J.R., Camara O., Echebarria B., Gerardo Giorda L., Pueyo E., Saiz J., Sebastián R., Soudah E., Vázquez M., Cardiac computational modelling [Modelización computacional cardiaca], Revista Española de Cardiología, 74, 1, 65 - 65, 2021.
  9. C. Lopes P., L. Rangel R., Martha L.F., An interactive user interface for a structural analysis software using computer graphics techniques in MATLAB, Computer Applications in Engineering Education, 29, 6, 1505 - 1505, 2021.
  10. Caballero F.J., Toledo M.Á., Moran R., San Mauro J., Hydrodynamic performance and design evolution of wedge-shaped blocks for dam protection against overtopping, Water (Switzerland), 13, 12, 1665 - 1665, 2021.
  11. Cavaliere F., Zlotnik S., Sevilla R., Larráyoz X., Díez P., Nonintrusive reduced order model for parametric solutions of inertia relief problems, International Journal for Numerical Methods in Engineering, 122, 16, 4270 - 4270, 2021.
  12. Charpin L., Niepceron J., Corbin M., Masson B., Mathieu J.-P., Haelewyn J., Hamon F., Åhs M., Aparicio S., Asali M., Capra B., Azenha M., Bouhjiti D.E.-M., Calonius K., Chu M., Herrman N., Huang X., Jiménez S., Mazars J., Mosayan M., Nahas G., Stepan J., Thenint T., Torrenti J.-M., Ageing and air leakage assessment of a nuclear reactor containment mock-up: VERCORS 2nd benchmark, Nuclear Engineering and Design, 377, 111136 - 111136, 2021.
  13. Chen Y., Tang Z., Periaux J., Comparison and Analysis of Natural Laminar Flow Airfoil Shape Optimization Results at Transonic Regime with Bumps and Trailing Edge Devices Solved by Pareto Games and EAs, SEMA SIMAI Springer Series, 24, 155 - 155, 2021.
  14. Chiumenti M., Cervera M., Moreira C.A., Barbat G.B., Stress, strain and dissipation accurate 3-field formulation for inelastic isochoric deformation, Finite Elements in Analysis and Design, 192, 103534 - 103534, 2021.
  15. Codina R., Moreno L., Analysis of a stabilized finite element approximation for a linearized logarithmic reformulation of the viscoelastic flow problem, ESAIM: Mathematical Modelling and Numerical Analysis, 55, S279 - S279, 2021.
  16. Codony D., Arias I., Suryanarayana P., Transversal flexoelectric coefficient for nanostructures at finite deformations from first principles, Physical Review Materials, 5, 3, L030801 - L030801, 2021.
  17. Codony D., Gupta P., Marco O., Arias I., Modeling flexoelectricity in soft dielectrics at finite deformation, Journal of the Mechanics and Physics of Solids, 146, 104182 - 104182, 2021.
  18. Codony D., Mocci A., Barceló-Mercader J., Arias I., Mathematical and computational modeling of flexoelectricity, Journal of Applied Physics, 130, 23, 231102 - 231102, 2021.
  19. Cordero J.A., Prat P.C., Ledesma A., Experimental analysis of desiccation cracks on a clayey silt from a large-scale test in natural conditions, Engineering Geology, 292, 106256 - 106256, 2021.
  20. Cornejo A., Franci A., Zárate F., Oñate E., A fully Lagrangian formulation for fluid-structure interaction problems with free-surface flows and fracturing solids, Computers and Structures, 250, 106532 - 106532, 2021.
  21. Damians I.P., Bathurst R.J., Olivella S., Lloret A., Josa A., 3D modelling of strip reinforced MSE walls, Acta Geotechnica, 16, 3, 711 - 711, 2021.
  22. Dawi M.A., Muñoz J.J., Stability bounds of a delay visco-elastic rheological model with substrate friction, Journal of Mathematical Biology, 83, 0, 71 - 71, 2021.
  23. de la Torre Sangrà D., Fantino E., Flores R., Calvente Lozano O., García Estelrich C., An automatic tree search algorithm for the Tisserand graph, Alexandria Engineering Journal, 60, 1, 1027 - 1027, 2021.
  24. Dialami N., Chiumenti M., Cervera M., Rossi R., Chasco U., Domingo M., Numerical and experimental analysis of the structural performance of AM components built by fused filament fabrication, International Journal of Mechanics and Materials in Design, 17, 1, 225 - 225, 2021.
  25. Díaz G., Herrera R.F., Muñoz-La Rivera F., Atencio E., Generative design for dimensioning of retaining walls, Mathematics, 9, 16, 1918 - 1918, 2021.
  26. Díez P., Muixí A., Zlotnik S., García-González A., Nonlinear dimensionality reduction for parametric problems: A kernel proper orthogonal decomposition, International Journal for Numerical Methods in Engineering, 122, 24, 7306 - 7306, 2021.
  27. Duarte-Vidal L., Herrera R.F., Atencio E., Muñoz-La Rivera F., Interoperability of digital tools for the monitoring and control of construction projects, Applied Sciences (Switzerland), 11, 21, 10370 - 10370, 2021.
  28. Eisenträger S., Eisenträger J., Gravenkamp H., Provatidis C.G., High order transition elements: The xNy-element concept, Part II: Dynamics, Computer Methods in Applied Mechanics and Engineering, 387, 114145, - , 2021.
  29. Felippa C.A., Oñate E., Accurate Timoshenko Beam Elements For Linear Elastostatics and LPB Stability, Archives of Computational Methods in Engineering, 28, 3, 2021 - 2021, 2021.
  30. Flores R., Burhani B.M., Fantino E., A method for accurate and efficient propagation of satellite orbits: A case study for a Molniya orbit, Alexandria Engineering Journal, 60, 2, 2661 - 2661, 2021.
  31. Franci A., Lagrangian finite element method with nodal integration for fluid–solid interaction, Computational Particle Mechanics, 8, 2, 389 - 389, 2021.
  32. Franza A., Losacco N., Ledesma A., Viggiani G.M.B., Jimenez R., Protecting surface and buried structures from tunnelling using pile walls: A prediction model, Canadian Geotechnical Journal, 58, 10, 1590 - 1590, 2021.
  33. Galaz-Delgado E.I., Herrera R.F., Atencio E., Rivera F.M.-L., Biotto C.N., Problems and challenges in the interactions of design teams of construction projects: A bibliometric study, Buildings, 11, 10, 461 - 461, 2021.
  34. Gens A., Alcoverro J., Blaheta R., Hasal M., Michalec Z., Takayama Y., Lee C., Lee J., Kim G.Y., Kuo C.-W., Kuo W.-J., Lin C.-Y., HM and THM interactions in bentonite engineered barriers for nuclear waste disposal, International Journal of Rock Mechanics and Mining Sciences, 137, 104572, - , 2021.
  35. Giacomini M., Borchini L., Sevilla R., Huerta A., Separated response surfaces for flows in parametrised domains: Comparison of a priori and a posteriori PGD algorithms, Finite Elements in Analysis and Design, 196, 103530, - , 2021.
  36. Giacomini M., Sevilla R., Huerta A., HDGlab: An Open-Source Implementation of the Hybridisable Discontinuous Galerkin Method in MATLAB, Archives of Computational Methods in Engineering, 28, 3, 1941 - 1941, 2021.
  37. Giannis K., Schilde C., Finke J.H., Kwade A., Celigueta M.A., Taghizadeh K., Luding S., Stress based multi-contact model for discrete-element simulations, Granular Matter, 23, 2, 17 - 17, 2021.
  38. Giménez J.M., Idelsohn S.R., Oñate E., Löhner R., A Multiscale Approach for the Numerical Simulation of Turbulent Flows with Droplets, Archives of Computational Methods in Engineering, 28, 6, 4185 - 4185, 2021.
  39. Giuliodori A., Hernández J.A., Fernandez-Sanchez D., Galve I., Soudah E., Numerical modeling of bare and polymer-covered braided stents using torsional and tensile springs connectors, Journal of Biomechanics, 123, 110459 - 110459, 2021.
  40. González Tejada I., Monteiro-Alves R., Morán R., Toledo M.Á., Cellular automata modeling of rockfill dam failure caused by overtopping or any other extreme throughflow, Engineering Structures, 245, 112933 - 112933, 2021.
  41. Granados J.J., Martinez X., Nash N., Bachour C., Manolakis I., Comer A., Di Capua D., Numerical and experimental procedure for material calibration using the serial/parallel mixing theory, to analyze different composite failure modes, Mechanics of Advanced Materials and Structures, 28, 14, 1415 - 1415, 2021.
  42. Grillone B., Mor G., Danov S., Cipriano J., Lazzari F., Sumper A., Baseline energy use modeling and characterization in tertiary buildings using an interpretable bayesian linear regression methodology, Energies, 14, 17, 5556 - 5556, 2021.
  43. Grillone B., Mor G., Danov S., Cipriano J., Sumper A., A data-driven methodology for enhanced measurement and verification of energy efficiency savings in commercial buildings, Applied Energy, 301, 117502 - 117502, 2021.
  44. Hashemi M.R., Ryzhakov P.B., Rossi R., Three dimensional modeling of liquid droplet spreading on solid surface: An enriched finite element/level-set approach, Journal of Computational Physics, 442, 110480 - 110480, 2021.
  45. Hashemi M.R., Ryzhakov P.B., Rossi R., Toward droplet dynamics simulation in polymer electrolyte membrane fuel cells: Three-dimensional numerical modeling of confined water droplets with dynamic contact angle and hysteresis, Physics of Fluids, 33, 12, 122109 - 122109, 2021.
  46. Hashemian A., Garcia D., Rivera J.A., Pardo D., Massive database generation for 2.5D borehole electromagnetic measurements using refined isogeometric analysis, Computers and Geosciences, 155, 104808 - 104808, 2021.
  47. Hermosilla P., Muñoz-La Rivera F., Ateaga N., Gallardo E., Strategy for the evaluation and monitoring of competencies in engineering programs to improve students’ learning and quality of education, Sustainability (Switzerland), 13, 21, 11721 - 11721, 2021.
  48. Hermosilla P., Quiroz C., Cabrejos F., Rivera F.M.-L., A proposal for the optimisation of algorithms for the calculation of the energy demands of residential housing, Mathematics, 9, 16, 1994 - 1994, 2021.
  49. Idelsohn S.R., Gimenez J.M., Nigro N.M., Oñate E., The Pseudo-Direct Numerical Simulation method for multi-scale problems in mechanics, Computer Methods in Applied Mechanics and Engineering, 380, 113774 - 113774, 2021.
  50. Iqbal M.D., Birk C., Ooi E.T., Gravenkamp H., Development of the scaled boundary finite element method for crack propagation modeling of elastic solids subjected to coupled thermo-mechanical loads, Computer Methods in Applied Mechanics and Engineering, 387, 114106 - 114106, 2021.
  51. Jacob-Loyola N., Muñoz-La Rivera F., Herrera R.F., Atencio E., Unmanned aerial vehicles (Uavs) for physical progress monitoring of construction, Sensors, 21, 12, 4227 - 4227, 2021.
  52. Jaimes-Estévez J., Zafra G., Martí-Herrero J., Pelaz G., Morán A., Puentes A., Gomez C., Castro L.P., Hernández H.E., Psychrophilic full scale tubular digester operating over eight years: Complete performance evaluation and microbiological population, Energies, 14, 1, 151 - 151, 2021.
  53. Jiménez S., Cornejo A., Barbu L.G., Barbat A.H., Oller S., Failure pressure analysis of a nuclear reactor prestressed concrete containment building, Engineering Structures, 236, 112052 - 112052, 2021.
  54. Jofré-briceño C., Rivera F.M.-L., Atencio E., Herrera R.F., Implementation of facility management for port infrastructure through the use of uavs, photogrammetry and bim, Sensors, 21, 19, 6686 - 6686, 2021.
  55. Kim S., Cervera M., Wu J.-Y., Chiumenti M., Strain localization of orthotropic elasto-plastic cohesive–frictional materials: Analytical results and numerical verification, Materials, 14, 8, 2040 - 2040, 2021.
  56. Kumar S., Codony D., Arias I., Suryanarayana P., Flexoelectricity in atomic monolayers from first principles, Nanoscale, 13, 3, 1600 - 1600, 2021.
  57. La Rivera F.M., De Matos B.Á.E., Lozano-Igualt V., MUNICIPAL IOT IMPLEMENTATION STRATEGY for BRASÍLIA, BRAZIL: SMART CITY GUIDELINES at the LOCAL LEVEL, WIT Transactions on Ecology and the Environment, 253, 451 - 451, 2021.
  58. Le Roux A.-L., Tozzi C., Walani N., Quiroga X., Zalvidea D., Trepat X., Staykova M., Arroyo M., Roca-Cusachs P., Dynamic mechanochemical feedback between curved membranes and BAR protein self-organization, Nature Communications, 12, 1, 6550 - 6550, 2021.
  59. Lloret-Cabot M., Wheeler S.J., Gens A., Sloan S.W., Numerical integration of an elasto-plastic critical state model for soils under unsaturated conditions, Computers and Geotechnics, 137, 104299 - 104299, 2021.
  60. Löhner R., Antil H., Srinivasan A., Idelsohn S., Oñate E., High-Fidelity Simulation of Pathogen Propagation, Transmission and Mitigation in the Built Environment, Archives of Computational Methods in Engineering, 28, 6, 4237 - 4237, 2021.
  61. López J.C., Toledo M.Á., Moran R., A unified view of nonlinear resistance formulas for seepage flow in coarse granular media, Water (Switzerland), 13, 14, 1967 - 1967, 2021.
  62. Lu X., Cervera M., Chiumenti M., Lin X., Residual stresses control in additive manufacturing, Journal of Manufacturing and Materials Processing, 5, 4, 138 - 138, 2021.
  63. Lu X., Chiumenti M., Cervera M., Li J., Lin X., Ma L., Zhang G., Liang E., Substrate design to minimize residual stresses in Directed Energy Deposition AM processes, Materials and Design, 202, 109525 - 109525, 2021.
  64. Lu X., Chiumenti M., Cervera M., Tan H., Lin X., Wang S., Warpage analysis and control of thin-walled structures manufactured by laser powder bed fusion, Metals, 11, 5, 686 - 686, 2021.
  65. Lu X., Zhang G., Li J., Cervera M., Chiumenti M., Chen J., Lin X., Huang W., Simulation-assisted investigation on the formation of layer bands and the microstructural evolution in directed energy deposition of Ti6Al4V blocks, Virtual and Physical Prototyping, 16, 4, 387 - 387, 2021.
  66. Mánica M.A., Gens A., Ovando-Shelley E., Botero E., Vaunat J., An effective combined framework for modelling the time-dependent behaviour of soft structured clays, Acta Geotechnica, 16, 2, 535 - 535, 2021.
  67. Mata J., Salazar F., Barateiro J., Antunes A., Validation of machine learning models for structural dam behaviour interpretation and prediction, Water (Switzerland), 13, 19, 2717 - 2717, 2021.
  68. Meng J., Zhang X., Utili S., Oñate E., A nodal-integration based particle finite element method (N-PFEM) to model cliff recession, Geomorphology, 381, 107666 - 107666, 2021.
  69. Mocci A., Barceló-Mercader J., Codony D., Arias I., Geometrically polarized architected dielectrics with apparent piezoelectricity, Journal of the Mechanics and Physics of Solids, 157, 104643 - 104643, 2021.
  70. Monforte L., Gens A., Arroyo M., Mánica M., Carbonell J.M., Analysis of cone penetration in brittle liquefiable soils, Computers and Geotechnics, 134, 104123 - 104123, 2021.
  71. Mor G., Cipriano J., Gabaldon E., Grillone B., Tur M., Chemisana D., Data-driven virtual replication of thermostatically controlled domestic heating systems, Energies, 14, 17, 5430 - 5430, 2021.
  72. Mor G., Cipriano J., Grillone B., Amblard F., Menon R.P., Page J., Brennenstuhl M., Pietruschka D., Baumer R., Eicker U., Operation and energy flexibility evaluation of direct load controlled buildings equipped with heat pumps, Energy and Buildings, 253, 111484 - 111484, 2021.
  73. Mor G., Cipriano J., Martirano G., Pignatelli F., Lodi C., Lazzari F., Grillone B., Chemisana D., A data-driven method for unsupervised electricity consumption characterisation at the district level and beyond, Energy Reports, 7, 5667 - 5667, 2021.
  74. Moran R., Toledo M.Á., Peraita J., Pellegrino R., Energy dissipation in stilling basins with side jets from highly convergent chutes, Water (Switzerland), 13, 10, 1343 - 1343, 2021.
  75. Mora-Serrano J., Muñoz-La Rivera F., Valero I., Factors for the automation of the creation of virtual reality experiences to raise awareness of occupational hazards on construction sites, Electronics (Switzerland), 10, 11, 1355 - 1355, 2021.
  76. Moreno E., Dialami N., Cervera M., Modeling of spillage and debris floods as Newtonian and viscoplastic Bingham flows with free surface with mixed stabilized finite elements, Journal of Non-Newtonian Fluid Mechanics, 290, 104512 - 104512, 2021.
  77. Moreno L., Codina R., Baiges J., Numerical simulation of non-isothermal viscoelastic fluid flows using a VMS stabilized finite element formulation, Journal of Non-Newtonian Fluid Mechanics, 296, 104640 - 104640, 2021.
  78. Muñoz-La Rivera F., Mora-Serrano J., Valero I., Oñate E., Methodological-Technological Framework for Construction 4.0, Archives of Computational Methods in Engineering, 28, 2, 689 - 689, 2021.
  79. Narváez-Muñoz C., Ryzhakov P., Pons-Prats J., Determination of the operational parameters for the manufacturing of spherical pvp particles via electrospray, Polymers, 13, 4, 529 - 529, 2021.
  80. Neiva E., Badia S., Robust and scalable h-adaptive aggregated unfitted finite elements for interface elliptic problems, Computer Methods in Applied Mechanics and Engineering, 380, 113769 - 113769, 2021.
  81. Nieto-Palomo F., Pérez-Rueda M.-Á., Lipsa L.-M., Vaquero-Puerta C., Vilalta-Alonso J.-A., Vilalta-Alonso G., Soudah-Prieto E., Statistical techniques for predicting rupture risk in abdominal aortic aneurysms: A contribution based on bootstrap, Science Progress, 104, 2, 1-21, 2021.
  82. Nyga A., Muñoz J.J., Dercksen S., Fornabaio G., Uroz M., Trepat X., Baum B., Matthews H.K., Conte V., Oncogenic RAS instructs morphological transformation of human epithelia via differential tissue mechanics, Science Advances, 7, 42, eabg6467 - eabg6467, 2021.
  83. Oorthuis R., Vaunat J., Hürlimann M., Lloret A., Moya J., Puig-Polo C., Fraccica A., Slope orientation and vegetation effects on soil thermo-hydraulic behavior. An experimental study, Sustainability (Switzerland), 13, 1, 14 - 14, 2021.
  84. Ordaz M., Salgado-Gálvez M.A., Giraldo S., R-CRISIS: 35 years of continuous developments and improvements for probabilistic seismic hazard analysis, Bulletin of Earthquake Engineering, 19, 7, 2797 - 2797, 2021.
  85. Parada S., Codina R., Baiges J., Development of an algebraic fractional step scheme for the primitive formulation of the compressible Navier-Stokes equations, Journal of Computational Physics, 433, 110017 - 110017, 2021.
  86. Parera F., Pinyol N.M., Alonso E.E., Massive, continuous, and non-invasive surface measurement of degree of saturation by shortwave infrared images, Canadian Geotechnical Journal, 58, 6, 749 - 749, 2021.
  87. Parés N., Nguyen N.C., Díez P., Peraire J., A posteriori goal-oriented bounds for the Poisson problem using potential and equilibrated flux reconstructions: Application to the hybridizable discontinuous Galerkin method, Computer Methods in Applied Mechanics and Engineering, 386, 114088 - 114088, 2021.
  88. Pedrosa F., Andrade C., Spatial variability of concrete electrical resistivity and corrosion rate in laboratory conditions, Construction and Building Materials, 306, 124777 - 124777, 2021.
  89. Pérez-González C., Ceada G., Greco F., Matejčić M., Gómez-González M., Castro N., Menendez A., Kale S., Krndija D., Clark A.G., Gannavarapu V.R., Álvarez-Varela A., Roca-Cusachs P., Batlle E., Vignjevic D.M., Arroyo M., Trepat X., Mechanical compartmentalization of the intestinal organoid enables crypt folding and collective cell migration, Nature Cell Biology, 23, 7, 745 - 745, 2021.
  90. Proietti S., Flores R., Fantino E., Pontani M., Long-term orbit dynamics of decommissioned geostationary satellites, Acta Astronautica, 182, 559 - 559, 2021.
  91. Puigferrat A., de-Pouplana I., Amato F., Oñate E., Numerical prediction of the distribution of black carbon in a street canyon using a semi-Lagrangian finite element formulation, Building and Environment, 199, 107910 - 107910, 2021.
  92. Puigferrat A., Masó M., de-Pouplana I., Casas G., Oñate E., Semi-Lagrangian formulation for the advection–diffusion–absorption equation, Computer Methods in Applied Mechanics and Engineering, 380, 113807 - 113807, 2021.
  93. Quinteros R.D., Barbat A., Nallim L.G., Oller S., Numerical Study of Vibrations Induced by Traffic in Structures and a Screen Alternative for Its Mitigation, International Journal of Architectural Heritage, 15, 10, 1512 - 1512, 2021.
  94. Ramon A., Caselle C., Bonetto S.M.R., Costanzo D., Alonso E.E., Effect of Microstructure and Relative Humidity on Strength and Creep of Gypsum, Rock Mechanics and Rock Engineering, 54, 8, 4121 - 4121, 2021.
  95. Raschi M., Lloberas-Valls O., Huespe A., Oliver J., High performance reduction technique for multiscale finite element modeling (HPR-FE2): Towards industrial multiscale FE software, Computer Methods in Applied Mechanics and Engineering, 375, 113580 - 113580, 2021.
  96. Reis J., Moitinho de Almeida J.P., Díez P., Zlotnik S., Error estimation for proper generalized decomposition solutions: Dual analysis and adaptivity for quantities of interest, International Journal for Numerical Methods in Engineering, 122, 3, 752 - 752, 2021.
  97. Rivera F.M.-L., Mora-Serrano J., Oñate E., Factors influencing safety on construction projects (Fscps): Types and categories, International Journal of Environmental Research and Public Health, 18, 20, 10884 - 10884, 2021.
  98. Rivera F.M.-L., Vielma J.C., Herrera R.F., Gallardo E., Waste identification in the operation of structural engineering companies (SEC) according to lean management, Sustainability (Switzerland), 13, 8, 4249 - 4249, 2021.
  99. Rivet I., Dialami N., Cervera M., Chiumenti M., Reyes G., Pérez M.A., Experimental, computational, and dimensional analysis of the mechanical performance of fused filament fabrication parts, Polymers, 13, 11, 1766 - 1766, 2021.
  100. Roca D., Cante J., Lloberas-Valls O., Pàmies T., Oliver J., Multiresonant Layered Acoustic Metamaterial (MLAM) solution for broadband low-frequency noise attenuation through double-peak sound transmission loss response, Extreme Mechanics Letters, 47, 101368 - 101368, 2021.
  101. Roca D., Hussein M.I., Broadband and Intense Sound Transmission Loss by a Coupled-Resonance Acoustic Metamaterial, Physical Review Applied, 16, 4, 54018 - 54018, 2021.
  102. Rocas M., García-González A., Zlotnik S., Larráyoz X., Díez P., Nonintrusive uncertainty quantification for automotive crash problems with VPS/Pamcrash, Finite Elements in Analysis and Design, 193, 103556 - 103556, 2021.
  103. Ros Chaos S., Pallis A.A., Saurí Marchán S., Pino Roca D., Sánchez-Arcilla Conejo A., Economies of scale in cruise shipping, Maritime Economics and Logistics, 23, 4, 696 - 696, 2021.
  104. Rosenberg L.N., Balouka N., Herer Y.T., Dani E., Gasparin P., Dobers K., Rüdiger D., Pättiniemi P., Portheine P., van Uden S., Introducing the shared micro-depot network for last-mile logistics, Sustainability (Switzerland), 13, 4, 2067 - 2067, 2021.
  105. Rossi R., Zorrilla R., Codina R., A stabilised displacement–volumetric strain formulation for nearly incompressible and anisotropic materials, Computer Methods in Applied Mechanics and Engineering, 377, 113701 - 113701, 2021.
  106. Salazar F., Conde A., Irazábal J., Vicente D.J., Anomaly detection in dam behaviour with machine learning classification models, Water (Switzerland), 13, 17, 2387 - 2387, 2021.
  107. Saloustros S., Cervera M., Kim S., Chiumenti M., Accurate and locking-free analysis of beams, plates and shells using solid elements, Computational Mechanics, 67, 3, 883 - 883, 2021.
  108. Sanz-Ramos M., Bladé E., González-Escalona F., Olivares G., Aragón-Hernández J.L., Interpreting the manning roughness coefficient in overland flow simulations with coupled hydrological-hydraulic distributed models, Water (Switzerland), 13, 23, 3433 - 3433, 2021.
  109. Servan-Camas B., Daniel Di-Capua D., Garcia-Espinosa J., Sa-Lopez D., Fully 3D ship hydroelasticity: Monolithic versus partitioned strategies for tight coupling, Marine Structures, 80, 103098 - 103098, 2021.
  110. Sisó G., Rosell-Mirmi J., Fernández Á., Laguna G., Vilarrubi M., Barrau J., Ibañez M., Rosell-Urrutia J., Thermal analysis of a MEMS-based self-adaptive microfluidic cooling device, Micromachines, 12, 5, 505 - 505, 2021.
  111. Soler-Sagarra J., Hakoun V., Dentz M., Carrera J., The multi-advective water mixing approach for transport through heterogeneous media, Energies, 14, 20, 6562 - 6562, 2021.
  112. Song F., Rodriguez-Dono A., Olivella S., Gens A., Coupled solid-fluid response of deep tunnels excavated in saturated rock masses with a time-dependent plastic behaviour, Applied Mathematical Modelling, 100, 508 - 508, 2021.
  113. Tello A., Codina R., Field-to-field coupled fluid structure interaction: A reduced order model study, International Journal for Numerical Methods in Engineering, 122, 1, 53 - 53, 2021.
  114. Tena A., Claria F., Solsona F., Meister E., Povedano M., Detection of bulbar involvement in patients with amyotrophic lateral sclerosis by machine learning voice analysis: diagnostic decision support development study, JMIR Medical Informatics, 9, 3, e21331 - e21331, 2021.
  115. Tosi R., Amela R., Badia R.M., Rossi R., A Parallel Dynamic Asynchronous Framework for Uncertainty Quantification by Hierarchical Monte Carlo Algorithms, Journal of Scientific Computing, 89, 1, 28 - 28, 2021.
  116. Tourchi S., Vaunat J., Gens A., Bumbieler F., Vu M.-N., Armand G., A full-scale in situ heating test in Callovo-Oxfordian claystone: observations, analysis and interpretation, Computers and Geotechnics, 133, 104045 - 104045, 2021.
  117. Tousi N.M., Coma M., Bergadà J.M., Pons-Prats J., Mellibovsky F., Bugeda G., Active flow control optimisation on SD7003 airfoil at pre and post-stall angles of attack using synthetic jets, Applied Mathematical Modelling, 98, 435 - 435, 2021.
  118. Tozzi C., Walani N., Le Roux A.-L., Roca-Cusachs P., Arroyo M., A theory of ordering of elongated and curved proteins on membranes driven by density and curvature, Soft Matter, 17, 12, 3367 - 3367, 2021.
  119. Ullah S., Ahmad F., Al-Sehemi A.G., Raza M.R., Assiri M.A., Irfan A., Oñate E., Yeoh G.H., Effects of expandable graphite on char morphology and pyrolysis of epoxy based intumescent fire-retardant coating, Journal of Applied Polymer Science, 138, 41, 51206 - 51206, 2021.
  120. Valdés-Vázquez J.G., García-Soto A.D., Chiumenti M., Response of a double hypar fabric structure under varying wind speed using fluid-structure interaction, Latin American Journal of Solids and Structures, 18, 4, e366 - e366, 2021.
  121. Valdés-Vázquez J.G., García-Soto A.D., Chiumenti M., Hernández-Martínez A., Time history analysis of a tensile fabric structure subjected to different seismic recordings, Earthquake and Structures, 20, 2, 161 - 161, 2021.
  122. Vila-Pérez J., Giacomini M., Sevilla R., Huerta A., Hybridisable Discontinuous Galerkin Formulation of Compressible Flows, Archives of Computational Methods in Engineering, 28, 2, 753 - 753, 2021.
  123. Wang L., Zhang X., Zaniboni F., Oñate E., Tinti S., Mathematical Optimization Problems for Particle Finite Element Analysis Applied to 2D Landslide Modeling, Mathematical Geosciences, 53, 1, 81 - 81, 2021.
  124. Xue A., Lin X., Wang L., Lu X., Ding H., Huang W., Heat-affected coarsening of β grain in titanium alloy during laser directed energy deposition, Scripta Materialia, 205, 114180 - 114180, 2021.
  125. Yago D., Cante J., Lloberas-Valls O., Oliver J., Topology optimization using the unsmooth variational topology optimization (UNVARTOP) method: an educational implementation in MATLAB, Structural and Multidisciplinary Optimization, 63, 2, 955 - 955, 2021.
  126. Yang L., Zhang Y., Andrade C., Zhang C., Study on the Correlation Between Chloride Ion Transportation and pH Distribution in Unsaturated Mortar, Cailiao Daobao/Materials Reports, 35, 18, 18064 - 18064, 2021.
  127. Zhao M., Zorrilla R., Rossi R., Wüchner R., A time averaged steady state method for the Navier–Stokes equations, International Journal for Numerical Methods in Fluids, 93, 7, 2023 - 2023, 2021.
  128. Zorrilla R., Larese de Tetto A., Rossi R., A discontinuous Nitsche-based finite element formulation for the imposition of the Navier-slip condition over embedded volumeless geometries, International Journal for Numerical Methods in Fluids, 93, 9, 2968 - 2968, 2021.

SOURCE: www.scopus.com